Seal of authenticity for SIMATIC S7-300 modules from 2016

По русски... с 2016 года для защиты своей продукции Сименс будет клеить голографические наклейки
https://support.industry.siemens.com/cs/document/109481378/seal-of-authenticity-for-simatic-s7-300-modules?dti=0&dl=en&lc=en-EN

Тo ensure that SIMATIC S7-300 modules are original products, they will be provided in a multi-stage process with a seal of authenticity. Customers can easily check whether their products are original Siemens products based on this seal. The implementation will take place in several stages and is intended to be completed by the end of 2016. Mixed deliveries of products with and without the seal of authenticity may occur during the implementation. The implementation increases the functional version of the modules.  Aside from the seal of authenticity, there are no technical changes to the product. You will be informed separately when the implementation is complete.

SIMATIC S7-300 module with seal of authenticity Siemens Halske symbol

Handling The seal of authenticity is located on the long side of the module between the two housing parts and consists of a hologram film as safety feature.

Function of the seal In addition to proof of authenticity, the seal also shows whether a module has been opened without authorization. The seal is destroyed when removed and cannot be re-applied.

Products

This change will be made to all modules of the SIMATIC S7-300 series, i.e. CPUs, IO modules, power supplies, communication and function modules, and the IM153 from the ET 200M product series.

Products with an article number (MLFB) that does not begin with 6ES7... will not be provided with a seal of authenticity.

Depending on the lighting, the hologram shows the texts ORIGINAL, GENUINE or VALID together with the copyright Siemens Halske symbol.

 

 

По русски... с 2016 года для защиты своей продукции Сименс будет клеить голографические наклейки.
В зависимости от угла взгляда будут видные разные слова